(Click
here if you do not see a website index to the left)
So
your camera doesn't have a threaded lens to allow use of our threaded adapters?
Or you have more than one camera you would like to use?
Maybe you would like to use your camera on a variety of optical devices?
Our Universal Camera Mount is the answer. Available in 2 sizes to fit virtually any eyepiece. It can be used on most telescopes, microscopes, monoculars, binoculars, etc. The easy to adjust micrometric X-Y stages make precise optical alignment quick and easy. Once adjusted for a particular eyepiece/camera combination it installs and removes quickly and easily with the twist of a single knob. The padded eyepiece clamp is non marring and the camera is held securely in place by its tripod mounting hole. Constructed of aluminum and rigid composites for a very stable mounting.
Specifications for UCM1:
Min Eyepiece Diameter: 28mm
Max Eyepiece Diameter: 44mm
Max Camera Depth: 60mm
(Depth measured from tripod mounting hole to tip of lens at max extension)
Specifications for UCM2:
Min Eyepiece Diameter: 43mm
Max Eyepiece Diameter: 65mm
Max Camera Depth: 60mm
(Depth measured from tripod mounting hole to tip of lens at max extension)
Description |
Item # |
Price |
Add to Cart |
Universal Camera Mount - Small (28-44mm Eyepiece Diameter) |
UCM1 |
$39.95
|
|
Universal Camera Mount - Large (43-65mm Eyepiece Diameter) |
UCM2 |
$44.95 |
Fits many TeleVue
eyepieces!
AdaptaView
Premium Eyepiece Adapter
This versatile adapter will fit many premium eyepieces with a removable rubber eyeguard and a top diameter (with the eyeguard removed) between 1.25" and 1.75". It is known to fit the following eyepieces....Tele Vue 32mm Plössl, 40mm Plössl, 55mm Plossl, All Nagler Type 2's and Type 4's, All Panoptics, Radians and Ethos. It also fits Televue and Vixen Zoom eyepieces and the following Meade eyepieces: UWA-8.8mm and 14mm, SWA-24.5mm, 32mm, 40mm and 56 Super Plossl. Useful for both SLR/DSLR and Digital Cameras using the proper step rings or T Ring. To use this adapter you slip off the rubber eyeguard and secure the 3 thumbscrews into the groove that normally retains the eyeguard. Due to the weight of the camera nylon screws are not an option, any light marks that may be left after removal will be covered up by the eyeguard when it is replaced (the same steel screw system is used by TeleVue on their Radian adapter)
This unit is equipped with a standard male "T" thread on top (42mm .75). You will also need a T-Ring, Step Ring and/or "Attachment Kit" to mount to your camera.
Description |
Item
# |
Price |
Add
to Cart |
AdaptaView |
AVIEWU |
$39.95 |
Universal T Adapter
The Universal T Adapter fits a very wide variety of eyepieces found on telescopes, microscopes, spotting scopes, even many medical instruments such as slit lamps. Available in different size ranges to cover most eyepieces. These adapters are manufactured of aluminum with a black anodized finish and have 6 nylon thumbscrews to center and secure it to the eyepiece. The thread is a standard male 42mm "T" Thread. You will also need a T-Ring, step ring and/or "Attachment Kit" to mount to your camera.
Tip: After centering and adjusting the adapter for your eyepiece put a mark on an adjacent upper and lower thumbscrew.
From now on only loosen these 2 screws for removal and it will be self centering the next time you use it.
Description |
Item
# |
Price |
Add
to Cart |
1.5" Universal T Adapter |
UT1 |
$29.95 |
|
2.5"
Universal T Adapter |
UT2 |
$69.95 |
MaxView™ Digiscoping Adapter
for Pentax Spotting scopes
Pentax PF80-ED shown coupled to a Sony DSC-F717 with MaxView-P
The MaxView-P is a special variant of our award winning MaxView 40 product. It has a different focal point to work specifically with the Pentax scopes. The MaxView-P is a wide field eyepiece that uses a special cell and long eye relief to reduce vignetting to a minimum. The MaxViews are not zoom eyepieces, instead they are designed to get the most from the zoom on your camera. This gives much better results than trying to shoot through a zoom eyepiece and gives you a much larger zoom range. The MaxView-P is "T" threaded on top so you will need the appropriate Attachment Kit or Step Ring to mount it to your camera Lens. Can also be used as a low power wide field eyepiece (with adjustable eye relief), flip down rubber eyeguard and a storage bottle are included.
Specifications: Focal Length = 40mm, AFOV = 50 Degrees, Maximum Effective Eye Relief = 29 mm (effective eye relief takes into account how deeply recessed the lens is mounted in the housing), Minimum Effective Eye Relief = Fully Adjustable, Barrel Size = 1.25", Thread Size = 42mm (Standard "T" thread), Coatings = Fully Multicoated (each air to glass surface has multiple anti-reflection coatings), Optical Design = 2 element/2 group.
Description |
Item # |
Price |
Add to Cart |
MaxView Afocal Eyepiece / T Adapter |
MV40P |
$99.00 |
All material on this website is copyright CNC
Parts Supply, Inc. 2008. All rights Reserved.
